35.6 mhz saw filter for vsb system l-if applications part number mn91694 spectrum microwave, inc. 324 clark street, worcester, ma 01606, usa phone 508-852-5400 fax 508-852-8456 www.spectrummicrowave.com dsSF0036BA00642T rev x4 24feb11 page 1 of 3 description 35.6 mhz saw bandpass filter with 7.4 mhz bandwidth . 35.05 x 20.57 mm dip package, 24 pins. rohs compliant. typical performance s11 (25.7-45.7 mhz) s22 (25.7-45.7 mhz) amp 10 db/div amp 1 db/div phase 5 deg/div delay 50 ns/div center = 35.7 mhz, 2 mhz/div (25 khz incr)
35.6 mhz saw filter for vsb system l-if applications part number mn91694 spectrum microwave, inc. 324 clark street, worcester, ma 01606, usa phone 508-852-5400 fax 508-852-8456 www.spectrummicrowave.com dsSF0036BA00642T rev x4 24feb11 page 2 of 3 specification parameter min typ max units f_visual 38.9 mhz f_color 32.9 mhz f_audio 32.4 mhz center frequency (nominal) 35.6 mhz insertion loss 28 31 32 db 2 db lower band edge 31.79 31.95 mhz 2 db upper band edge 39.35 39.46 mhz passband ripple (32.08 39.23 mhz) 0.3 0.8 db phase deviation (32.08 39.23 mhz) 2.5 8 deg pp gd ripple (32.08 39.23 mhz) 30 50 ns pp rejection (20 31.10 mhz) 45 55 db rejection (31.1 31.3 mhz) 52 60 db rejection (40.35 65.0 mhz) 45 55 db 2t k factor 1 % c/l delay 12.5 t 5 ns delay 4.43 us ambient temperature 40 oc temperature coefficient 74 ppm / oc source/load impedance 50 maximum ratings parameter min max units storage temperature range 40 85 ?c input power level +13 dbm matching circuit notes: external matching components are not required. device is to operate in a 50 ohm singleended syste m. input 50 w single ended output 50 w single ended gnd gnd 3 15 22 10
35.6 mhz saw filter for vsb system l-if applications part number mn91694 spectrum microwave, inc. 324 clark street, worcester, ma 01606, usa phone 508-852-5400 fax 508-852-8456 www.spectrummicrowave.com dsSF0036BA00642T rev x4 24feb11 page 3 of 3 package outline iso 9001 registered date code (yy=year, ddd= day) esd symbol (pin 1 indicator) smi ba00628t ? yyddd units: mm tolerances are typically 0.15 mm except where indicated. pin configuration: input: 3 input return: 22 output: 15 output return: 10 ground: all other pins all specifications are believed to be accurate and reliable. however, spectrum microwave reserves the right to make changes without notice. ? 2011 all rights reserved.
|